Showing: 1 - 9 of 9 Articles
A Concrete Septic system's Building Refine

A Concrete Septic system’s Building Refine

The term “Septic system” describes the container made use of to hold wastewater from a house or various other frameworks. A septic system, frequently described as a sewer gathering system, is constructed in houses to deal with sewers on a neighborhood range. This is typical in locations without access to significant sewage lines or where an ideal drainage system does not exist. Commonly, a 1.5 to 1.8-meter underground level is where this tank is developed. The septic system is connected to sewage system lines that convey drainage leaving the residence. The normal septic system has a 1,000-1,500 gallon sewer capacity. A sewage-disposal tank has two connections: one end goes to a drainpipe field, and the various other to a wastewater consumption pipeline.

At one end of the tank, wastewater goes into, and also at the various other, it exits. The tank obtains the effluent from the restroom, cooking area, as well as a toilet. The larger sediments sink to the bottom of this storage tank after being pumped and filled with wastewater. Anaerobic microorganisms change heavy fragments in wastewater into sludge and gases. In general, when the density of the solids goes beyond the thickness of the water, the greater density particles sink to the bottom of the container, and also the lower density solids drift. The floating fragments are referred to as “residue,” while the settling solids are described as “sludge.” The deterioration of this solid waste is sped up by sludge germs.

A Concrete Septic system's Building Refine

A scum layer forms on the surface of the wastewater when the grease and also oil particles, which are among the least thick waste, float to the top. After an established quantity of time, the waste is sucked through the electrical outlet, and also the septic tank is drained. To develop septic tanks, a number of materials can be made use of, such as concrete, concrete blocks, high-density polyethylene, fiberglass, as well as fiber-reinforced plastic. Before being prohibited owing to rust problems, steel storage tanks were allowed.

You’ve most likely seen them prior to – those huge, eco-friendly, or blue storage tanks that are typically constructed next to homes in the nation. They are concrete sewage-disposal tanks, and they play a vital duty in sewer therapy for house owners and company owners that are not attached to a municipal sewer system. In this blog post, we’ll check out the building and construction of concrete sewage-disposal tanks as well as why septic tank cleaning is necessary so that you can much better recognize exactly how they work. Keep reading for more information!

Why Construct Septic Tanks Out of Concrete?

If you’re looking to install a brand-new septic tank or simply intend to change an outdated sewage-disposal tank, there are numerous various products to think about. The success of mounting a new sewage-disposal tank relies on a number of factors. Remember that for years to come, your new container will meet a critical pipe feature in your residence. The product you choose will certainly be one of the most important factors to take into consideration while mounting your brand-new septic system. Septic systems constructed from concrete blocks are presently the standard.

As a result of their longevity, weight, and also strength, cinder block septic tanks are frequently utilized. With adequate building and construction, cinder block septic systems are much less vulnerable to leak or float. An effective maintenance program can add decades and even centuries to the lifespan of a cinder block septic system. Because plastic storage tanks are less costly in advance than concrete blocks, many property owners are convinced to pick them rather than doing an extensive cost comparison. A plastic storage tank of inferior quality may appear like a great way to conserve money today, but in the future, it could cost more to preserve. Additionally, since they have not received regulatory agency authorization, fiberglass septic systems are tough to locate.

Cinder block sewage-disposal tanks are more convenient to use and also have various advantages over the alternatives. A cinder block has this top quality built straight in, in contrast to plastic and also fiberglass, which requires further processing to make them water-proof. Leakages are much less likely to happen during the tank’s lifetime as a result of the intrinsic water tightness of the cinder block. Every sewage-disposal tank needs to be pumped out after a certain quantity of time. Nevertheless, if the storage tank fills up also swiftly, it can all sudden be required to pump it. When sewage-disposal tanks are created of concrete blocks, there is a reduced probability that homeowners will certainly need an unforeseen pump out.

Concrete block sewage-disposal tanks are reasonably immune to wear and tear from points like climate, tree roots, and also changing dirt makeup. Cinder block sewage-disposal tanks may hold heat for a longer amount of time, which subsequently advertises the development of the germs that break down the influent. This will cause cleaner effluent from the tank onto your area, which is healthy and balanced for the system in its entirety. Contrasted to its plastic matchings, cinder block septic tanks make it through longer as well as require much less upkeep. Sewage-disposal tanks made of cinder blocks are the finest option since they are the easiest to build and preserve. Visit https://www.lightintheboxblog.com/basic-carpentry-skills-every-newbie-should-know/ to read about Basic Carpentry Skills Every Newbie Should Know.

1. Develop The Dimension And Place

Think about the depth you want for your septic tank. Municipal building codes regulate the height of the sewage line from the house to the septic tank access. Additionally, it is required to develop the wastewater line from the septic system to the lateral dump areas at the appropriate height. A survey group may review the relevance of the website based on where your building is located. The typical length-to-size ratio of a sewage-disposal tank is required to determine its size. The regular size-to-width ratio of a septic tank is 4:1 or 2:1.

Normally, the storage tank needs to have the ability to hold a minimum of 3,000 liters of effluent. The suitable size of a septic tank will certainly rely on the volume of wastewater created daily. This quantity differs depending upon the variety of residents in the house and also whether or not it is connected to both the blackwater and also greywater systems. An appropriately constructed septic system may be hard to customize once it has been installed. As a result of this, it’s vital to think about the maximum number of individuals that might possibly reside in a certain home in the future depending upon its dimension and variety of spaces, along with the number of people who are currently residing there.

2. Obtaining the Pit Ready

Where the septic system will be installed, develop a pit by excavating. A backhoe is used to get rid of the dirt from the pit as well as to dig the trenches for the pipelines most likely to as well as from the septic tank. The depth of the pit will be specified by the deepness of the septic tank in order to provide the necessary loss (at least 1:80) from the bathroom to the inlet to the septic tank.

At the very least 2 meters should divide the pit’s width and also length from the septic system’s. The bottom of the pit should be totally flat. Before the structure can start if the soil is sand, a perimeter structure requires to be laid. Over the pit’s base, make a bed of crushed rock that goes at least 6 inches deep. The earth under the septic tank will certainly be more strong as a result, and also less prone to move or crack.

3. Produce The Floor Covering

The floor of the septic tank must after that be constructed. The flooring of the septic system should be constructed of strengthened concrete that is 100 mm deep as well as reinforced according to regional structure requirements. At a deepness of 30 mm underneath the completed floor, the enhancing steel grid needs to be set up. Put concrete to a deepness of roughly 4 inches in addition to this bed. Wait up until this layer has actually had a day to dry up prior to moving on to the following stage.

4. Place A Wall surface Up

The usual material for septic tank wall surfaces is concrete blocks enhanced with steel bars. 400 millimeters in length and 200 millimeters in height are the standard dimensions for a cinder blocks. A succession of concrete blocks should be put on top of the flooring after it has actually been set up, with the hollow cores extending flat along the border of the excavated pit to develop the wall. Their exterior sides need to have a wall-to-edge splitting up of around 6 inches. The approximately six-inch space between the outside of the blocks and also the bordering dust is full of gravel.

It is recommended to differ the arrangement of the blocks in the list below degrees after startling the second layer to ensure that each block lays over both listed below it. Continue till your feet are just six inches from the ground, then halt. Using mortar in the spaces between cinder blocks is one error that is regularly made. Without using mortar, the blocks should be taken into the area. The walls of the storage tank should be enhanced utilizing the vertical steel rebar that was put throughout the floor pour.

A solid structural link is developed between the walls as well as the floor by inserting the bars right into the damp concrete. All outside blocks must be loaded with concrete in order to assure that the septic system is completely waterproof. Block filling and also boosting water tightness can both be assisted by a concrete additive as well as an expansion agent, specifically.

5. Develop The Inlet And Also Electrical Outlet Drains

The house’s drain’s separation point in the foundation need to be noted, as well as the pit’s inlet, should be straight. A trench that goes at least a foot wide as well as deep needs to be dug along that line. At least one inch needs to be contributed to the slope of the trench for every fifty feet it is dug deep into far from the house and into the pit. Afterward, insert 4-inch pipelines (often made of plastic) into the trench and connect them. The house’s septic tank’s pipe entrance should be permeated on one end, and the pit’s liner on the various other. The line needs to come down right into the sewage-disposal tank regarding six inches listed below the surface area. Conversely, to totally remove a block, it might be drilled to offer an area for the pipeline end.

6. Construct The Roofing

If the property owner so chooses, they can construct a septic system cover. However, if you want to develop the cover on your own, you’ll need to recognize just how to collaborate with steel. You ought to rather search for experienced aid. It will take less effort and time to finish this procedure. Ask for a concrete roof from a producer of concrete blocks that will fit over the outer side of the septic tank’s liner, and afterward have them install it for you. Prior to it being poured, a manhole must be cut into the form, and also the septic tank cover should be cut to the appropriate size. The roofing system needs steel support, as well as each corner requires large steel hooks driven into the concrete.

Hook onto the four steel hooks and also raise the roof covering of the container off the sand bed making use of a crane to place it very carefully. When the lid remains in the area, add dirt to the remaining part of the hole along with the drain trench and also compact it firmly. The trench and tank cover must be covered with a layer of topsoil that goes to the very least 6 inches thick. Obtainable lids are necessary for septic systems to ensure that sludge may be regularly drained pipes out of the filter as well as the container itself. It needs to have an impermeable and also waterproof cover. For solution, the covers need to be quickly accessed.

Take Care Of Sewage-disposal Tank

To avoid ending up being an eyesore in the neighborhood, septic systems need regular upkeep. The environment as well as human health and wellness are seriously threatened by both surface water as well as groundwater contamination. When the body’s natural filtering mechanism is jeopardized, air pollution happens. If a homeowner forgets to do normal maintenance or if more water is taken in than the system can manage, this might occur. If too much water or particles is introduced to the storage tank, the microorganisms inside may work themselves to fatigue.

Every 2 years, a septic system has to be expertly cleaned up and also drained pipes. A clog is much less likely if the drains are consistently cleared away. Sludge must be discharged when it builds up to a depth of three inches past the suction factor of the pipeline. Due to the presence of waste gases, there is an opportunity that the pit will scent. To decrease scents, the septic system regularly gets an infusion of wastewater. Wherever you can, reduce your dependence on pharmaceutical remedies. A fragile eco-friendly balance that exists in septic tanks is easily disturbed.

If you remain in the marketplace for a concrete sewage-disposal tank, make sure to maintain the construction procedure in mind. It’s not as basic as just putting some concrete and also calling it great! By complying with these ideas and also collaborating with a qualified contractor, you can ensure that your sewage-disposal tank will last for years (and even years) to come. Have any kind of concerns concerning sewage-disposal tanks or the construction procedure? Leave them in the comments below – we enjoy talking about all points of sewer! As well as if you’re searching for trustworthy, experienced septic system cleaners, make sure to Contact Ward Septics today.

Basic Carpentry Skills Every Newbie Should Know

Basic Carpentry Skills Every Newbie Should Know

There are a number of Basic Carpentry Skills Every Newbie Should Know. The first of these is using hand tools. While many people associate carpentry with hammers and saws, it is actually the nails that are the most important aspect of the job. When used properly, nails can make a world of difference in any project. The first thing that a newbie should learn is how to use a tape measure correctly, ensuring that they’ll avoid rubbing off numbers.

Another skill that a newbie should master is scribing. Although you can use a handsaw or golf club to cut a timber, it is more important to use a hammer because it gives you more accuracy than power. Having an excellent hammer is essential for tight joints and tight fit. So, learn to use a hammer correctly, so that your finished project turns out as it should.

Measurement is another important carpentry skill that a newbie should master. Not only is it an essential tool for carpentry, it’s also an invaluable skill. It is essential for a carpenter to get accurate measurements, otherwise their plans will end up being a complete waste of time. Moreover, even small errors in measurement can turn your project into a sham. Therefore, a woodworker should master proper measuring techniques.

Cutting is a crucial part of carpentry. It is an essential skill, as even the best-cut timbers may need to be scribed in for a neater finish. Sharp blades and a hammer are the basic tools that a carpenter should master. Ensure that you follow safety precautions when working with these tools. The best way to use a hammer is to hold it by its handle.

Using tools properly is another important skill. A carpenter must master the use of a hammer to strike nails. They must also learn how to use a saw and a drill. A basic carpentry skills checklist should include a few essential tools. The most basic carpentry tool is the hammer, which is used to make holes in wood. A hammer is essential for making a nail, while a saw is essential for cutting the wood. To learn Proper Use of Tools click here.

Basic Carpentry Skills Every Newbie Should Know

Knowing how to use hand and power tools is also crucial. While power tools are a great help in the carpentry process, hand tools are an essential component. They are necessary for making the final touches to a project and give it its unique appearance. The hand tools will be used across the board in carpentry and are indispensable for any type of work. This is why the knowledge of tools is important.

A carpenter should be able to use a hammer, nail, and plane. They should be able to use a saw to cut wood and use planers and clamps. They must be confident with their maths in order to progress in the field more quickly. A good grasp of these tools is an essential skill for a carpenter. You must also be able to read blueprints and diagrams of a project to determine how to build the best design.

There are a number of fundamental carpentry skills that every newbie should master. One of these is measuring. A carpenter must know how to properly measure and connect wood. Without these, they will not be able to build a carpentry project of any kind. You must learn to use the right tools in order to create a good project. This skill will help you in a wide range of projects.

A good carpenter must know how to use the hammer. There are several different types of hammers used in the field. Before you use any power tools, you should learn how to work with hand tools. By learning how to use a hammer, you can safely cut wood, make joints, and create any other objects. These are all essential carpentry skills that you should master. Learn more about Carpentry at https://www.lightintheboxblog.com/stunning-ways-to-use-carpentry-for-home-decor/

Carpentry Ideas For Your Storage and Display Needs

Carpentry Ideas For Your Storage and Display Needs

Using the right carpentry ideas can help you create the perfect storage and display space. Whether you’re trying to hide away a vanity counter or add more storage to a small bathroom, there are many options available to suit your needs. Listed below are some of the more common projects. Read on to discover more creative carpentry ideas. Here are a few examples: A built-in shelf can hide a toe kick or pin hole and give you additional floor space.

Creating a storage space with an attractive display is easy when you have an idea and a plan. One great way to use a wall-mounted shelf is to build a cabinet with shelves below. It’s a great way to showcase books or pottery and doesn’t take long to complete. All you need is a sheet of 3/4-inch plywood, wood glue, and 8d finish nails. To learn more about attractive storage space click here.

The next project is a built-in shelf. This is an excellent way to hide storage. You can build a base cabinet on the bottom half and use it as a countertop shelf. This allows you to use the lower half of the cabinet for larger items and make it easier to reach the top. You can also use glass fronts for display space. This will help keep the design uniform no matter what’s inside.

A custom built-in wardrobe is an excellent choice for storage needs. If you’re building a built-in wardrobe, consider using materials that match the style of your house. The wardrobe below is made from rustic beadboard paneling, which works well in an old farmhouse. Alternatively, you can build a raised bar counter for a small corner and create a dining area. The possibilities are endless.

Reclaimed wood can make beautiful storage and display solutions. By using recycled wood, you can create your own built-in bookcase without a shop. This method is also environmentally friendly. If you’re building a bookcase, you can choose a style that matches the room’s decor. Creating a custom built-in bookcase will help you to save money and reduce waste. The project is a great way to transform your existing bedroom into a modern space.

Carpentry Ideas For Your Storage and Display Needs

To make a unique bookcase, install a ledge on the top or sides. It is important to choose the right size for your shelf. A drawer should be built in the center of the shelf. An open bookcase will give you more space. A narrow bookcase can be an excellent solution for a small room. You should also look into the shape of the bookcase. A ledge can be a useful addition to a storage space in your bedroom.

A bench window seat next to a barn door is an excellent way to store and display your tools. A bench window seat in front of a barn door can also be a great alternative to built-ins. A large slat wall system can be used for storage and display needs. For the most efficient way to store tools, try hanging them on the wall. This will make it easier to find and use them.

A built-in shelf or bookcase can be a stylish and functional addition to a bathroom. A simple ladder can fit into a high ceiling. Depending on the height of your ceiling, a sliding ladder may be an option. A floating shelf is a good option if you want to create a non-obtrusive display. A custom-made bench or shelf can be a space-saving addition in your bathroom. Learn more about Carpentry for Home Decor at https://www.lightintheboxblog.com/stunning-ways-to-use-carpentry-for-home-decor/

Floating shelves are an ideal solution for small bathrooms. Floating shelves are a great way to fill empty wall space and add more storage space to a bathroom. Hidden hardware is essential to keep the shelves secure, but you can make them look more attractive by concealing it. A video tutorial will demonstrate how to do this step-by-step. There are a number of different types of floating shelf.

Stunning Ways to Use Carpentry for Home Decor

Stunning Ways to Use Carpentry for Home Decor

Carpentry is a very versatile skill. Everything that is made from wood will always remain timeless. Below are some stunning carpentry ideas you can use for home decor.

Cover the Walls with Wooden Backsplash

Empty walls can be boring and uninviting. They are even worse if not coloured. Give your walls a beautiful and more welcoming touch by installing a wooden backsplash. You can decide to have the backsplash all over the wall or create unique contours to achieve a look that fits your personality and taste. All you require is wood that can grip. You can also hire a professional carpenter if you cannot DIY. learn more DIY’s at http://www.lightintheboxblog.com/10-spring-cleaning-lifesavers/

Wooden Hangers in the Kitchen

A Kitchen is the busiest room in any house. There are a lot of things that take place in the kitchen and this is why you should make it even more functional by adding wooden hangers. You can hang your mugs, kitchen towels, and aprons. The wooden hanger will give your home a vintage touch.

Add a Beautiful Wooden Coffee Table

Coffee tables made from glass are the most common today, but why be common when you can stand out from the rest by using a wooden coffee table? You do not need an expert to get you a wooden coffee table. You can decide to DIY, it is even cheaper compared to hiring an experts like GM Carpentery. All you need are sizable wood chunks put together. Just like the hangers in the kitchen, wooden coffee tables will add a natural yet timeless touch to your home.

Stunning Ways to Use Carpentry for Home Decor

How do Wooden Floating Shelves Around the House Sound?

Amazing! Right? There are so many things that you can do with wooden floating shelves. You can install them in your bedroom, kitchen, sitting room and even in the bathroom. The following are some ideas to help you make wooden floating shelves functional in your home.

  • Wooden floating shelves in your kitchen – in the kitchen, you can place spice containers or recipe books on top of these types of shelves. You can even place a small tin of planted mint or Rosemary on the wooden floating shelves
  • In the bedroom, you can place a picture with an inspiring quote or a beautifully framed picture of your loved ones on it
  • In the sitting area, wooden floating shelves can be used to save up space. You can place books to those beautiful vases that you have laying somewhere in the house

You can never go wrong with wooden floating shelves in home decor.

Try a Wooden Furniture in Your Study Room

Currently, a lot of people work from home. This has made many people include study rooms in their homes. Over the years, these study rooms have evolved and turned into offices where meetings are held and even clients come in and out. Installing wooden furniture in such rooms will make them appear timeless, the room will never go out of style. For example, you can have a desk made from wood and add a study lamp on it to make it complete. learn working from home ideas at https://enterprise.gov.ie/en/What-We-Do/Workplace-and-Skills/Remote-Working/

Up to You

There are amazing things that you can do using wood and many of them are DIY. Wood is a material that is readily available and cheap to purchase. The next time you are looking for a unique way to refurbish your home then think about carpentry, you will never go wrong.

10 Spring Cleaning Lifesavers

10 Spring Cleaning Lifesavers

04598a1563e61dbb57c2d874b69ca0ca

It’s that time of year again… spring cleaning! These 10 hacks will get your home in pristine condition with very minimal time and effort. You’re welcome!

1. Lemon = Bye-bye hard-water stains

2. Pour one cup white vinegar + one cup hot water in a measuring up in your microwave for 5 minutes = Spotless microwave

3. Sprinkle 1/4 cup salt onto grapefruit and scrub your bathtub  = Sparkling tub

4. Toothpaste + a damp cloth = No more permanent marker stains on your wood floor

5. Lemon white vinegar ice cubes = Clean and fresh garbage disposal (drop one cube in each night!)

6. Hot water in your washing machine + a bit soap + Legos in a laundry bag = Super clean toys

7. One blast of canned air = Dust-free bathroom exhaust/fan

8. Boil orange peels + cloves = Instant air freshener

9. Squeegee carpet and furniture = So long pet hair

10. Sprinkle baking soda on a damp sponge = Perfect way to scrub crayon out of walls

Welcome Spring with 10 DIY Decor Projects

Welcome Spring with 10 DIY Decor Projects

Since spring officially starts March 20,  it’s time to roll out the welcome mat for the new season! Literally. Give your home a spring makeover with these 10 DIY projects .

1. Fruity Welcome Mat

Make the watermelon mat:

1. Fold your circular mat in half and mark it on either side with a Sharpie to create a reference mark for the middle.

2. Create a line down the middle with your ruler and cut down this line.

3. Spray paint the rugs white to act as a base color.

4. Create a stencil of your rugs on paper by tracing them.

5. For the watermelon, cut two rings out along the outer edge. They should be 1″ for the outermost and 3/4″ for the inner.

6. Cover the middle part of the watermelon. Leave the inner most ring on and cover it with coins to keep it down.

7. Spray the outermost part green.

8. Once it’s dry, cover it with the ring again. Take off the center covering and spray paint it red.

9. Let dry overnight. Cover the middle section again and trace where you want the seeds.

10. Cut out the seeds.

11. Replace the stencil and hold it down with coins. Spray it black. Let sit until it’s dry.

Make the lemon mat:

1. Repeat the same steps until you get to spray painting it red. Instead, pray this mat yellow.

2. Cover the outer rings with the stencil you already made and hold it down with coins.

3. Make your inside stencil by creating the shapes of the inside of the lemon with a Sharpie and cut out the pieces.

4. Spray paint it white and let it dry.

Welcome Spring with 10 DIY Decor Projects

2. Tissue Flower Votives

1. Cut the tissue paper down and wrap it around the votive, securing it with the double sided tape.
2. Cut out petal shapes on strips of paper long enough to wrap around the votive. Using the double sided tape again, secure the petal strips around the votive.
3. Once the paper is secured, adjust it with your fingers, pulling the petals back and giving them shape like actual petals.
4. Place a candle in the votive!
3. Egg Carton Wreath
1. Deconstruct egg cartons. Use the portion that holds the egg to create the flowers. Give some rounded petals and some fringed. Use the flat parts of the carton to make leaves.
2. Paint each part. Use yellow, red, green, blue and green paints.
3. Cut out a large cardboard circle for the base and paint it green.
4. Use a hot glue gun to attach the parts to the base as you like.

4. Egg-celent Centerpiece

1. Start with a chicken roaster to get the effect.
2. Fill the outermost area with Easter eggs.
3. Use the center for the flowers.

 5. Wine Bottle Tiki Torches

1. Fill an empty and clean wine bottle about 1/3 full with glass pebbles.
2. Insert a Tiki refill wick into a brass coupling doohickey.
3. Fill the bottle with Tiki fuel.
4. Insert the wick and that’s it!

6. Planter Chandelier

1. Remove all electrical wiring from the chandelier and the plastic “candle” holders with wire cutters.
2. Attach terra cotta saucers with putty and glue.
3. Attach the pots in the same way. Let dry for 1-2 hours.
4. Spray paint the entire thing, including the chain. Hanging the chandelier from a low tree makes this easy.
5. Let dry, then plant your flowers!

7. Cloud Lights

1. Pull cotton batting until it looks fluffy.
2. Hot glue it to the outside of a paper lantern.
3. Insert flameless, LED candles.

8. Rainbow Centerpiece

1. Add a few drops of gel food coloring to each vase.
2. Use a toothpick to help blend the coloring and water. Add more water to make it lighter or more gel to make the color more bold.
3. Insert your choice of flower. White flowers really pop against the coloring!

9. Umbrella Wreath

1. Fill an umbrella with flowers and close it.
2. Tie a ribbon around the center.
3. Hang it on your door with a hook.

10. Flower Pot Fire Pit

1. Fill the flower pot with rocks.
2. Even out the rocks, so that you have a flat surface.
3. Place chafing fuel container on top of the rocks. Make sure it sits a little bit higher than the pot.
4. Evenly place more rocks around the chafing fuel container.
10 Easy and Creative Easter Egg Ideas

Think Outside the Carton: 10 Easy and Creative Easter Egg Ideas

OK, so Easter is right around the corner and your kids are probably starting to mention all that comes with it — the Easter bunny, candy, egg hunts, and of course, decorating Easter eggs!  This year, get really creative with the family-bonding tradition. Skip the basic dye kits, and try one of these equally easy, but vastly cooler ideas!

1. Temporary Tattoo Eggs

temporary-tattoo-eggs(Credit: Uncommon Designs)

1. After hard boiling, make sure the egg is completely dry. Take the clear plastic cover off of the tattoo and place the tattoo face down on top of the egg. Make sure it’s placed exactly where you want it.

2.  Dab a damp washcloth on top of the paper.  Don’t saturate it too much, but do make sure the tattoo is removed in its entirety from the paper label. Done!

2. Marbled Nail Polish Eggs

2015-03-11_1442(Credit: Hello Natural)

1. Fill a plastic cup up with room temperature water. If the water is too hot or too cold, it won’t work.

2. Put lots of nail polish into the cup. Combine a variety of colors that you think will be fun together. If the polish sinks, the temperature of the water isn’t correct. The polish should spread out on top of the water. Swirl it with a toothpick.

3. Hold your egg between your fingers, so that you cover the least amount of surface area on the egg. Then dunk straight down into the water, hold for a second underwater and then bring it up. The polish will cover about half of the egg. Sit the egg in a carton to let it dry.

3. Sprinkle Eggs

DIY-Sprinkle-Covered-Easter-Eggs3(Credit: Studio DIY)

1. Pour your sprinkles into a medium size bowl.

2. Squeeze some tacky glue out of the bottle onto freezer paper or wax paper.

3. Using your paintbrush, cover your hard-boilded egg in a good, even layer of the glue.

4. Now dip your egg in the sprinkles and press down firmly, covering about half your egg in sprinkles.

5. Let go of your egg in the bowl, and using a spoon, cover the other half of the egg with the sprinkles

6. After your egg is fully covered in sprinkles, firmly press the arc of the spoon against and around your egg, helping to “seal” the sprinkles on.

4. Beans, Seeds and Rice Eggs

11053416_861490317242497_3662044294377849311_n(Credit: Praktic Ideas)

1. Simply follow the same steps as the sprinkle eggs. Replaces sprinkles with your choice of beans, seeds or rice.

5. Sharpie Eggs

135-37941-07-1368277424(Credit: mom.me)

1. This is the simplest craft, ever. Use pastel Sharpies to draw anything you like on your hard-boiled eggs!

6. Kool-Aid Eggs

kool-aid-colors-1024x682(Credit: Passion for Savings)

1. Prep by hard boiling your eggs and mixing each Kool-Aid packet with about 2/3 cups water.

2. Pour each color into a different container large enough to dip the eggs.

3. Dip your eggs with a spoon or wire egg-dipping tongs.

4. Let dry!

7. Crystal Eggs

Crystalegg(Credit: Bitz & Giggles)

1. Instead of hard-boiled eggs, use metallic plastic eggs.

2. Fill a small bowl with epsom salts. (Fine grained, not coarse!)

3. Squeeze some glue onto a plate. Clear glue is preferable.

4. Dip the egg into the glue. Make sure the glue is smeared all over the egg.

5. Place the egg into the salt bowl.

6. Grab a spoon and start spooning the salts over the egg, while using your other hand to rotate it. Use the backside of the spoon to pack the salts onto the egg . This helps them stay on.

7. Let dry for 30-45 minutes.

8. Despicable Me Eggs

2015-03-11_1621(Credit: A Thrifty Mom)

1. Separate yellow and blue plastic eggs. Merge the top part of the yellow eggs to the bottom part of the blue eggs.

2. Cut black electrical tape into a thin strip and stick it to the top yellow half.

3. Use a dot of glue to stick a googly eye in place, and draw hair and a mouth with a black Sharpie.

9. Pantone Eggs

1-Pantone-easter-eggs(Credit: How About Orange)

1. To dye eggs like this, stand them vertically in a small cup of traditional egg dye.

2. Use tattoo paper to create the labels. Remember to type the words backwards. Then apply the “tattoos” to the egg.

10. Lace Eggs

6-LaceWrap(Credit: Celebrating Everyday Life)

1. Prep by hard boiling your eggs and cutting your lace into strips (lace ribbons work beautifully!).

2. Tie the lace strips very tightly around around your egg.

3. Dye them in traditional egg dye.

4. Alternatively, you can dye just the egg. Then wrap fresh lace around it.

Wedding Reception Decoration Ideas

Wedding Wednesday:7 Wedding Reception Decoration Ideas on a Budget

The planning of wedding reception is a big stress, especially if you’re trying to stick to a strict budget. Luckily, there are plenty of ways to save money on fun, elegant, and memorable decor. Here are seven inexpensive wedding reception decoration ideas:

If you’re a bookworm and have a big collection of books, you can use some of your books to decorate your wedding reception.

Wedding favors can be used on the table to act as decorations. Make a centerpiece out of favors so each of your guests can take home part of your wedding decor. Just look at these cute heart shaped spoons!

An elegant wedding birdcage for your cards. Give your guests a fun spot to place their wedding well wishes with this splendid Birdcage Card Holder.

Wishing trees are pretty, bright and sparkly and fun to make — you don’t have to be an expert to create it. Ask your guest to leave their wishes on tree leaves. You can collect them and make a storybook wedding album later.

Fill a gorgeous little wedding bomboniere or favor box with some sweet candies, lollies, almonds and other fillers for your wedding day. You can even create a bomboniere yourself!

Glue lace doilies around jars to add a touch of vintage class to your wedding tea-lights, lanterns and vases. They will light up your wedding reception!

Simple and cute idea to decorate your wedding reception. And most importantly, it’s affordable for everyone.

Do you LIKE these ideas? Can you share any tips for inexpensive decoration of  wedding reception?

Welcome Spring with 10 DIY Decor Projects

7 Affordable DIYs to Make Your Backyard Heaven

d935ef894e0adb1b0eab72e75f959be1

Summer is right around the corner, so it’s officially time to get your backyard in order. These ideas will make your outdoor space a true oasis. You’ll want to spend every spare second sipping lemonade and relaxing in your yard after implementing them!

1. Adorable cinderblock bench

All You Need:

  • 12 cinderblocks (6 for each side)
  • 4 pieces of 4″ x 4″ x 10 ft. lumber
  • concrete adhesive (to keep the cinderblocks grouped together)
  • cushions
  • Paint for the cinderblocks

(Credit: Buzzfeed)

2. Buried pot garden

All You Need:

  • Ceramic pots with a wide brim
  • Your choice of plants
  • Mulch, gravel or stones to fill in the space between pots
  • Rosemary to edge the garden

(Credit: Apartment Therapy)

3. Glow-in-the-dark planters

All You Need:

  • Planters of your choice
  • Glow-in-the-dark spray paint (you’ll want to do two coats of this)

(Credit: Buzzfeed)

4. Outdoor waterbed

All You Need:

  • Painter’s plastic (10×20)
  • Ironing board and iron
  • Parchment paper
  • Duct tape

Directions:

  • Turn your iron on to its hottest setting.
  • Roll out the plastic and fold it in half.
  • Take a two-feet long piece of parchment paper. Fold it in half, length-wise and draw a line about 2-inches out from the fold. This will be your guide of how far into iron. Begin with the edge of plastic opposite of its fold, starting at the corner. Open up your parchment and place your plastic inside, aligning it to the fold of the parchment. Then, fold the parchment back over.
  • Use the iron to melt the plastic together by running the iron across the line of your parchment. The iron should not touch the bare plastic.
  • Let cool for a few seconds before removing the parchment.
  • Continue to seal all of the edges, overlapping a few inches to make sure there are no holes. After sealing the end opposite of the fold, work from the sealed edge toward the fold. Everything will align perfectly! Now, carefully cut a small slit in the folded end of the plastic, near the corner.
  • Place the hose in a few feet, and prop the corner up so that the water does not spill out while you fill your water blob.
  • Seal off with duct tape.

(Credit: Homemade Toast)

5. Wine Bottle Tiki Torch

All You Need:

  • 1 empty and cleaned wine bottle
  • 1 Tiki Torch wick refill (thick)
  • Tiki Torch citronella lamp oil
  • 3/8″ diameter metal washer (or adjust washer size if bottle opening is larger/smaller)
  • Decorative glass rocks or beads of your choice

Directions:

  • Place the decorative rocks/beads in the bottle.
  • Feed the wick through the opening of the washer, leaving about a 1/4-inch of the wick sticking out of the top.
  • Pour the oil into a bottle, using a funnel, enough to cover half of the wick.
  • Feed the longer side of wick into the bottle.

(Credit: When the Pigs Fly)

6. Inflatable pool fountain

All You Need:

  • Measuring tape
  •  String
  •  Battery operated floating pool fountain
  •  Scissors
  • Waterproof vinyl adhesive or pool sealant
  • Towels
  • Batteries
  • Water

Directions:

  • Measure the fill depth of the baby pool by extending a measuring tape to the interior base from 2 inches below the rim.
  • Tie a string to the base of the floating pool fountain and extend it out to the measured fill depth plus one inch before cutting it off.
  • Glue the last inch of the string to the center of a dry baby pool using a waterproof adhesive. Allow the adhesive to fully dry according to the individual product instructions.
  • Place towels around the perimeter of the fountain prop to catch any over spray from the fountain. Load new batteries into the floating fountain.
  • Place the floating pool fountain in the center of the pool and pour in water until the string is almost fully extended. Turn the floating fountain on and adjust the height of the spray so the majority of the water falls into the baby pool.

(Credit: eHow)

7. Fire pit

All You Need:

  • Concrete mix
  • One extra-large bowl for exterior mold (ours was 17″ diameter)
  • One large bowl for interior mold (ours was 15″ diameter)
  • Non-stick cooking spray, or vegetable oil and paint brush
  • Large bucket for mixing
  • Medium-duty masonry trowel
  • Heavy objects such as exercise weights (or you can use the rocks below)
  • Sandpaper or sanding pad in coarse and fine grits
  • Gel fireplace fuel canisters
  • Replacement grill grate (ours was 14 1/2″ diameter)
  • Fire safe decorative stones

Directions:

This one’s a little more complicated! Find the step-by-step directions, plus handy advice on ManMade.