Tag Archives: apple

Philips Fluid Concept Design

Tech News: Watch Out for Flexible Displays

Philips Fluid Concept DesignDo you remember the 2010 Philips Fluid concept design? For those of you who don’t, the idea was a flexible smartphone that wrapped into a bracelet when not in use. At the time it seemed fantastically futuristic, but halfway through 2013 the idea is already much closer to reality!

Continue reading

necphoneisli

Tech News Part: 140938409254

So many news, so little time!  This year boasted a ton of upgrades (Samsung, Apple. Microsoft, anyone?) and tons of concept designs.  Read more for what’s in store in 2013!

Okay, so this isn’t the REAL iPhone 6, but one can dream, can’t he/she?  Of all designs that I’ve seen, the general consensus is a built-in projector that can be shown on any surface.  Apple will have its keynote on June 10th at the World Wide Developer’s Conference, where it should release some iPhone 6 news!

Does your phone ever get overheated, thereby rendering the phone impossible to use?  Never fear!  The NEC Medias X 06E has recently been produced, and can be cooled by a liquid cooling pipe located behind the display and next to the processor. Do YOU think this liquid-cooling phone is a good idea?

At Society for Information Display’s Display Week 2013, Samsung will be displaying several new gadgets, as well as its new 13.3-inch notebook with 3,200×1,800 (WQXGA+) pixel resolution, which surpasses Apple’s Retina MacBook Pro.  However, with such a small display, what can you really do with such an excellent resolution?

Watch out, Apple fans!  Coming this July, the iPad 5 will be in stores!  With the same resolution of  9.7-inch 2048 x 1536, the iPad 5 will be even lighter, with an improved LED backlighting.  Also in store for Apple this year will be two new iPad Minis, one of which has the Retina display.  Are YOU excited for these new gadgets?  Or are you not an Apple fan? =)

“We promise not to screw it up.” –  Marissa Mayer, in regards to Yahoo’s acquisition of Tumblr, for a whopping $1.1 billion.  With different demographics, can Tumblr survive under Yahoo’s rule?   With a lot of adult content in Tumblr, Yahoo can potentially face several lawsuits in the upcoming years.  What other troubles lie ahead?

Doodle3D is a new drawing tool that brings your sketches to a three-dimensional life.  This tool was created from a Kickstarter campaign, and geared towards an audience with a less serious drawing skills but interested in 3D printing at the same time.  The tool is actually a device itself that can be plugged into your iPad and 3D printer.  COOL or not??

So there it is, the news of  week.  Which devices/upgrades are you most looking forward to seeing come to life??

Ciao!

 

5

Presenting: Da Code iPhone Skins!

About Us

Da Code is a geek chic designer brand established in 2009. The brand aims to be a universal cultural symbol, a representative of current zeitgeist, and a philosophy open to interpretation. This is what inspires Da Code.

Integrated Design

Da Code protective skins become elegant extensions of your screens, completing a beautiful picture that perfectly complements your device and personality.

We’ve carefully prepared the dimensions of the skins to match various devices for you to fully express yourself.

Removable and Reusable

Da Code protective skins can be easily applied and re-positioned with no air bubbles, removed and reused without leaving any trace of adhesive – even after seven years.

3M’s Controltac™ graphic film technology is pressure-activated, allowing the skin to be easily applied, re-positioned, removed and reused on other devices without a loss of adhesive integrity.

Delicate Texture

To make more naturalistic skins that are fingertip-friendly, we selected this texture out of more than 30 raw material candidates.

It’s is just like real skin – comfortable and long-lasting. You will love the way it feels.

Fine Printing

Every printed pixel matters to us. Brightness, contrast, hue and saturation have all been finely tuned to produce the most accurate representation.

Buy Them Here:

amplifier dock

DIY Guide: Part 85435132

Here are some more awesome nerdy projects you can create for your gadgets…from an Instagram photobooth to an iPhone speaker, I hope you have fun trying out these projects!

Amplifier Dock

Materials:

  • Ceramic cereal bowl about 6.25″ diameter and 2.5″ height
  • 2 10-32 thread 1″ length flat head phillips machine screws
  • 2 10-32 thread wood tee nuts
  • A small piece of 1/8″ thick wool felt, at least 2.5″ sq
  • A block of hardwood you can cut down to 16″ x 2.3″ x 3/8″
  • A $.10 dime (totally serious)

Machine tools

  • Wood planer
  • Table saw
  • Chop saw
  • Belt or disc sander
  • Drill press
  • Drill bits
  • Forstner bit,
  • Countersink bit

Hand tools

  • Pencil
  • Calipers or tape measure
  • Block sander
  • Medium and fine grit sand paper
  • Clamp
  • Wood glue
  • Craft glue
  • Mallet or dead blow hammer
  • X-acto knife
  • Metal ruler
  • Masking tape
  • Phillips head screw driver
  • Awl

Instructions: Click here!

USB Hard Drive

Materials: 

  • dead Hard Drive
  • 4-port USB hub
  • few Flash Drives

Instructions: Click here!

Chocolate Chess Board

Ingredients:

  • Chocolate chess pieces mold (available online or in specialty cake supply shops)
  • 12 oz White candy melts (they come in 12 oz bag)
  • 12 oz Black candy melts (they come in 10 oz bags)
  • Plastic piping bags or plastic squeeze bottles
  • Small paring knife
  • Pair of white cotton gloves

Instructions: Click here!

Peanut Butter Popcorn

Ingredients: 

  • One large batch of popcorn (2/3c kernels)
  • 1/2c butter
  • 3/4c brown sugar
  • 1/4c peanut butter (a lump about the size an egg)
  • 20 large marshmallows or about 2c of fluff
  • Large bowl
  • Spoon
  • Sauce pan
  • Parchment paper
  • Popcorn popper

Instructions: Click here!

Kindle Cover

Materials: 

  • MDF/Acrylic or Plywood sheets of 2mm thickness (you can use any of them)
  • Synthetic Adhesive
  • Rexin / Faux leather (approx 2′x2′)
  • Elastic (preferably round cross section)
  • Foam sheet (2′x1′) !5mm thick or anything lying around would do
  • Sewing machine
  • Sticker Cutting machine/ Laser cutting machine required for making the logo (optional)

Instructions: Click here!

Instagram Photobooth

Materials: Click here!
Instructions: Click here!

pinterest1

Awesome MITB Reviews!

Facebook

Mary Gine Javier - Super Stereo Headphones.  Looking for good product with low price but high performance it can give. Finally, I found MiniInTheBox.com.  This amazing headphone will give you a good sounds quality. Clear sounds when you listen to music, super bass, and the color is so much beautiful. Looks fashionable, elegant and excellent product.  Good customer services, they all kind and I love them all. Fast Transaction, amazing product and FREE SHIPPING. you can buy it in a low price but the quality is good. The combination of color is awesome, its really fit my cellphone, laptop and tablet. Additional to it, having a headphone. I’m sure music lovers will want to order and buy this headphone. Two thumbs up LightInTheBox and MiniInTheBox. :))

Benjamin Parmier - Super !!!! Happy with my order

Pinterest

Lara Penner - Retro Camera Pattern Hard Case for Samsung Galaxy S3 I9300 (Multi-Color)

Twitter

people are asking me where i got my cases bc of this tweet pic.twitter.com/miSdDYv77t i got them at http://miniinthebox.com !!

Yes! Mn Miniinthebox ringetjes zijn binnen! ♥ (Yes!  My Miniinthebox rings are in!)

Anti - Sweat Xbox 360 Controller Version 1

Geeky DIY Projects!

From Anti-Sweat XBox controllers to IKEA speakers, here’s an awesome guide of DIY projects you can create for next to nothing!

Anti-Sweat XBox Controller 360

Materials:

  • Materials & Tools used:
  • Xbox 360 controller
  • 2X  20 mm / 2 cm Fan (SUNON 20 mm KDE0501PDB3-8)
  • (#2) Flat Blade screwdriver
  • (T9) Torx screwdriver
  • Pointy Nose Pliers
  • Drill
  • Small drill bit of your choice
  • Hot Glue Gun & Sticks
  • 9V Battery Plug
  • 9V Battery
  • Shrink wrap
  • White Cotton T-shirt for Holster
  • Sandwich bag
  • Permanent marker
  • Small knife for making bevelled edges (or you can use a bigger drill bit)
  • Lighter
  • Electrical tape

Instructions: Click here!

Binocular Mobile Phone Mount

Materials: 

  • 11x14in Stiff Black Cardstock, about 1/16in thick
  • Mobile Phone
  • Phone Sleeve Bumper Case
  • Ruler
  • Pencil
  • Hole Punch
  • Scissor
  • Rubber Cement
  • Rubber Band

Pieces Made:

  • (2) Support Frames
  • Lens Sleeve
  • Mobile Lens Support
  • Sled Body

Instructions: Click here!

Star Wars Film Cell Light Boxes

Materials: 

  • craft knife or scalpel
  • sand paper -soldering iron
  • solder
  • film cells of choice
  • mount board or card stock
  • large box frame 300mmx300mm
  • paint for the frame (only if you want to change the colour)
  • button or switch
  • wires
  • LED strip -resistors etc.

Instructions: Click here!

Spicy Candied Bacon

Ingredients:

  • Bacon
  • Dark drown sugar
  • Cayenne pepper
  • Crushed red pepper

Instructions: Click here!

Retro Wireless Speakers

Materials:

  • The Rocketfish speakers (RF-WS01)
  • 2 BLANDA MATT 11in Ikea serving bowls

Instructions: Click here!

Cinnamon Shortbread

Ingredients:

  • 6 oz plain flour
  • 4 oz unsalted butter, room temperature and cubed
  • 2 oz light brown sugar
  • 3/4 tablespoon ground cinnamon granulated sugar for dusting

Instructions: Click here!